You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close

USB Recovery For a Non-RAID System (Ubuntu/Linux)

https://hf-files-oregon.s3-us-west-2.amazonaws.com/hdpdigitalwatchdog_kb_attachments/2019/09-24/4763eb2b-7c2d-49d6-bfc0-47620cc0f150/image.png

USB Recovery For A Non-RAID System (Ubuntu/Linux)

-----------------------------------

Affected Roles:  Owner, Administrators

Complexity:  Medium to High

Last Edit:  April 3, 2020

-----------------------------------

System Recovery

When encountering major operational issues, use of recovery files may be recommended to resolve an issue. 

Examples of this include:

  • Ubuntu OS not booting
  • Important OS functions not working
  • Software Viruses

This article will outline how to recover a Linux embedded Blackjack Cube-LX using a USB Recovery key and the Clonezilla program.

Note:  The recovery process will completely reset the NVR and return the system to its factory defaults.  If possible, create a Database Backup and copy your License Keys before using the recovery.

If you are unsure if you should run the USB Firmware Recovery, please consult with Digital Watchdog Technical Support.

Supported/Affected Devices

  • DW Blackjack Bolt (Ubuntu/Linux)
  • DW Blackjack Cube (Ubuntu/Linux)
  • DW Blackjack P-Rack (Ubuntu/Linux)
  • DW Blackjack E-Rack (Ubuntu/Linux)

Running the Recovery

  1. Completely power down the NVR.
  1. Insert the provided Recovery USB accessory into a vacant USB port on the Blackjack Cube-LX.
  1. Power on the NVR and tap the Delete key on your keyboard to prompt the BIOS menu.
  1. Enter the BIOS password for the unit.

Note:  The default password is admin.

  1. Select the Boot tab.

Change the Boot mode select to UEFI.

  1. Adjust the Boot Device Priority so that Boot Option #1 is set to USB Key.

  1. Save and Exit the BIOS (shortcut:  F4 key).

Leave the USB connected to the BJCube-LX.

Note:  The system will shut down and reboot after saving this configuration.

  1. Once the system has finished rebooting, the Clonezilla program will begin display.

Using the arrow keys on the keyboard, select the img 2016-01-11-15-img (Default settings, VGA 800x600) Clonezilla option, then press the Enter key.

  1. Clonezilla will take some time to load setting and configurations for the recovery.

When the following screen displays, press the Y key, then the Enter key to continue with the process.

  1.   Another message requesting confirmation will display.

Press the Y key, then the Enter key to continue with the recovery process.

  1.   Clonezilla will display the Partclone progress window.

Allow the system to restore the image.  Image recovery may take 4 – 5 minutes to complete.

  1.   When the recovery progress has been completed, use the arrow keys on your keyboard to select Restart or Reboot, then press the Enter key.

Select OK to reboot the system.

  1.   As the unit is booting back up, tap the Delete key to prompt the BIOS menu again (Step 3).
  1.   Enter the BIOS password for the unit.

Note:  The default password is admin.

  1.   Select the Boot tab.

Change the Boot mode select back to Legacy.

  1.  Adjust the Boot Device Priority so that Boot Option #1 is set to Hard Disk.

  1.   Save and Exit the BIOS (shortcut:  F4 key).

Remove the Recovery USB from to the BJCube-LX.

Note:  The system will shut down and reboot after saving this configuration.

If running the USB Recovery did not resolve your issue, please contact Digital Watchdog Technical Support for further assistance.

  • 347
  • 24-Apr-2020
  • 1513 Views