DW Technical Bulletin
To: DW® Customers
Date: May 30, 2024
Re: DW Spectrum 5.1.4.38659 Release Notes
DW Spectrum IPVMS Software Update 5.1.4.38659
-----------------------------------
New Software Version: DW Spectrum 5.1.4.38659
Previous Software Version: DW Spectrum 5.1.3.38363
Release Date: May 30, 2024
-----------------------------------
In-Client Upgrade Information
In-Client Upgrade:
- Build Number: 38659
- Password: dad62j
Important Notes
- Support for Microsoft Windows 8.1 and Microsoft Server 2012 will be discontinued in the next major release (6.0/Gen6).
DW Specific Improvements and Fixes
- DW Spectrum Client now supports all the languages supported by the Global version:
- Catalan
- Chinese Simplified
- Chinese Traditional
- Czech
- Dutch (Netherlands)
- Dutch (Belgium)
- English (UK)
- English (US)
- Finnish
- French
- German
- Hebrew
- Hungarian
- Italian
- Japanese
- Korean
- Norwegian
- Polish
- Portuguese (Portugal)
- Portuguese (Brazil)
- Russian
- Spanish
- Swedish
- Thai
- Turkish
- Ukrainian
- Vietnamese
General Improvements and Fixes
- Improved support for Nvidia T1000 graphics cards in multiple monitors and multiple tile configurations.
Analytics Improvements and Fixes
- Event Post-Recording time did not correspond to the value specified in the Event rule. Fixed.
- VCA analytics is enabled on Videosec cameras.
- If the recording schedule was not set on a device, Object Search was unable to find some objects. Fixed.
- The Objects Tab was not shown when the Sample Plugin was enabled. Fixed.
- The Rules engine would reset the chosen Object Type for the "Analytic Object Detected" event. Fixed.
- Event Rules Engine did not allow setting a pre- and post-recording time for one-time, fixed duration Events. Fixed.
- If “Declare additional event types” was enabled on the “Stub: Events” plugin then the event types were not displayed in the Event Rules Engine. Fixed.
Device Support Improvements and Fixes
- Newly Supported Devices:
- Provision ISR DMA-340IPENx
- Karel NBE-454Zu-25
- Hikvision DS-2TD4237
- Encoders added to the analog list:
- Winic AR324x DVR
- Dahua N84B5N, N82B3P
- Clinton Electronics CE-E04HDA, CE-E16HDA
- Multisensor Cameras:
- Axis P3737PLE
- Hikvision DS-2SE7C432MW-AEBx
- Avigilon 32c-h5a-4mh
- Raysharp RS-CT252N6TNB, TB2XTH36IP5
- Advanced PTZ:
- Hikvision DS-2TD4228-10/W
- EUKLIS KLIS_D40X-IP-3M-IRD
- Dahua 5A445XANR
- i-PRO WV-S66300-Z3L, WV-S66300-Z4, WV-S66300-Z4L, WV-S66600-Z3L, WV-X86530-Z2_PTZ, WV-X86531-Z2_PTZ, WV-S66600-Z3, WV-S66700-Z3, WV-S65302-Z2, WV-S65340-Z2, WV-S65301-Z1, WV-B-S-U65300-ZY, WV-U61300-ZY, WV-S65340-Z, WV-S61501-Z1, WV-S65501-Z1, WV-S61302-Z4
- Device Specific Fixes:
- If the "Allow System to optimize camera settings" option was disabled, stream profiles were still created on Axis cameras. Fixed.
- Camera profile (stream resolution) was not properly handled on Axis analog cameras. Fixed.
- Bosch FLEXIDOME 5100i IR object "Vehicle" received as "unknown". Fixed.
- Provision ISR DMA-340IPEN-28 duplicated primary stream. Fixed.
- On Milesight cameras, the Desktop Client notifications triggered by camera events could have incorrect timestamp. Fixed.
- On Sharp YK-P02AG, Server configured the low-resolution stream as the primary one, and did not configure the secondary stream. Fixed.
- DAHUA DHI-VTO2202F-P could not be discovered manually. Fixed.
- Some Hanwha cameras were discovered and configured through Onvif with the primary resolution lower than expected. Fixed.
- Pelco VS1NN60 could not be discovered properly. Fixed.
- 2N SIP horn speaker entered an online/offline loop. Fixed.
- The Axis I8116 intercom was duplicated in the Resource Tree. Fixed.
- Alarm input and thermal sensor were not enabled for TVTH-S01-0001-BUL-G. Fixed.
- The input signal on KO1 ITXAI CSB2-2M4P-1IMARH was not detected. Fixed.
- CSG cameras were discovered with an incorrect vendor name. Fixed.
Bug Fixes
- In some cases, RTSP streams could enter a continuous online-offline loop after the RTSP stream goes offline. Fixed.
- Sometimes, the Desktop Client could experience connection drops with Server when connected over a slow network. Fixed.
- Audio could not work properly on some Edge devices when onvif_replay=true and audio were enabled. Fixed.
- On certain cameras, the recorded footage could have playback issues when camera recording was triggered by the "Analytic Object Detected" trigger. Fixed.
- Cloud systems can disconnect from the Cloud in some network environments. Fixed.
- A locked Video Wall can be closed from the Desktop Client. Fixed.
- Cross-System Layout that contained items from different Systems could close in case of the cloud connection interruption. Fixed.
- The Desktop Client allowed replacing camera streams on a Video Wall tab even if the layout was locked. Fixed.
- After closing a Camera on a Video Wall, or after a significant time passes, the layout settings can be changed. Fixed.
- The Desktop Client could crash if using a joystick. Fixed.
- Some streams from TestCamera could not be recorded and stored properly. Fixed.
- Multi-sensor video exported in the NOV format triggered unnecessary transcoding instead of using the source codec. Fixed.
For More Information or Technical Support
DW Technical Support:
Toll-free: 866.446.3595
https://www.digital-watchdog.com/contact-tech-support/
__________________________________________________________________________________
866.446.3595 [email protected] www.digital-watchdog.com
Rev: 05/24 Copyright © DW. All rights reserved. Specifications and pricing subject to change without notice.